If your Maytag washer is making a strange noise during the spin cycle, it’s likely due to a worn-out tub bearing. However, if the tub bearing isn’t the issue, you may be dealing with a problem with one of the suspension components or the spider support arm (for front-load washers only).
Unfortunately, replacing the tub bearing or spider support arm is a complex and time-consuming job best left to a professional technician. But don’t worry, checking and replacing the suspension components is a much simpler fix that you can handle yourself.
Before you get started, make sure to disconnect both the power and water supply to your washer.
These noises often point to a few specific issues.
Unbalanced Load
When your washer is overloaded or the load is unevenly distributed, it can cause the drum to make noise during the spin cycle. The washer’s internal sensors may sense this imbalance and automatically reduce the spin speed, or worse, stop altogether.
Worn or Broken Drum Bearings
If the noise sounds like a rumbling or grinding, the problem could lie in the drum bearings. These bearings support the drum’s movement, and if they wear down, it can cause friction, leading to strange noises.
Drive Belt Issues
A loose or worn-out drive belt can also result in unusual sounds and prevent the drum from spinning properly. If the belt slips or breaks, your washer may not even start the spin cycle.
Clogged Pump or Drain Hose
If your washer is struggling to drain water before the spin cycle, it may make a sloshing or gurgling noise. A blocked drain hose or pump can be the culprit, preventing proper drainage.
A washer that won't spin at all is more than just an inconvenience—it can throw off your whole laundry schedule. But before you call in a technician for Maytag washer repair, let’s go through some DIY steps.
The first thing you’ll want to do is check the load in your washer. If it’s too heavy or unevenly distributed, the machine might not be able to complete the spin cycle. Take out a few items to see if the spin cycle resumes. If the washer starts spinning normally, then your load was the issue.
Next, ensure that the drain hose is not kinked or clogged. A clogged hose can prevent water from draining properly, causing the washer to halt the spin cycle. If you find a blockage, clear it out, and the washer should resume working.
If your washer is making a rumbling sound and not spinning, the drive belt could be loose or damaged. Turn off the washer, remove the back panel, and check the belt for signs of wear and tear. If the belt looks frayed or broken, it’s time to replace it.
In some Maytag models, a faulty motor coupling can prevent the spin cycle from kicking in. This is an especially common issue in older washers. If you hear a buzzing sound but the drum isn’t spinning, the coupling may need replacing.
If your washer is making grinding or rumbling noises and refuses to spin, it might be time to check the drum bearings. These are harder to replace on your own, so if you suspect worn bearings, it might be best to call in a professional.
Dealing with a Maytag washer that makes noise during the spin cycle or doesn’t spin at all can be frustrating. From a malfunctioning lid switch to a worn-out drive belt or a faulty motor coupling, addressing the issue early is key to avoiding more costly repairs down the line. With the troubleshooting tips outlined here, you can identify the cause of the problem and potentially resolve it yourself!
However, if the issue is more complex or you’re not comfortable handling the repair, AP Pro Appliance Repair is here to help. We specialize in Maytag washer repair in Virginia and the surrounding areas.
Contact us today for a free quote and let our expert technicians restore your appliances to perfect working order.
